Heater for health care facility waste surveillance with the adhering to attributes:
– – In high temperatures( pyrolytic burner 2 chambers with temperatures varying from 950 º C to 1320 º C;
– – Capability to damage of 400 to 600kg per hr;
– – Effective in ruining germs;
– – Drain ash;
– Drain needle as well as glass crusher;
– – Patio with faucet water for hand cleaning and decontamination;
– – Observe the trouble of ecological high quality requirements, discharges proficient in addition to plan on the concern of waste; place big incinerator to among the largest veterinary university hospital in KSA so if you will certainly support us with one system (big incinerator) and also ecological with onsite training, the ability for the tool is 2000 Kg for cattle, equines as well as additionally farm animals in addition ideal to all animal waste kinds, we require it diesel fired. OES-Industrial MultiWaste Burner System (Solid/Liquid)
Level of the Job:
Style, setup along with appointing of multi hazardous waste burner.
Ability: 315 KG/HOUR STRONG WASTE/ OR 200 LITRES/HOUR FLUID WASTE (with dual chamber system).
1st chamber-870 Deg.C – – – – 900 Deg.C. Second chamber-1000 deg.C – 1200 Deg.C
Resources Of The Wastes.
The following types of wastes can be taken care of by using burner.
a). biography medical waste/pharmaceutical waste.
b). solid chemical waste/textile markets waste.
c). liquid chemical waste.
d). dyes in addition to intermediate waste.
e). all-natural chemical waste.
f). fluid ink waste/acidic deposit.
h). fungicide waste.
j). amino ethanol.
k). mono ethanolamine.
l). ETA, MEA waste.
m). wastes after treatment of chemicals in etp plant.
n). combined alcohol waste water.
o). alcoholic waste.
p). farming liquid chemical waste.
q). sludge mix fluid.
r). slurry/adhesive/grease/ powder coating wastes.
s). semi strong fluid chemical waste.
t). mass completely dry chemical waste.
u). pharma chemical wastes.
v). solvent chemicals/paint wastes/used glass grains.
w). used tires.
x). made use of cotton fabrics.
y). contaminated plastics/resin wastes.
Series of Job:.
Blaze all sorts of liquid/solid hazardous/chemical/non contaminateds products avaliable in the markets with proper scrubbing up system with typical emission rates.
The twin stage incinerator aids to burn the waste in 2 phases, initially at a tool temperature level of 870- 900 Deg C and likewise the 2nd stage at 1200 deg C.
Producing ash as well as Aeriform fumes which are treated with cyclone type wet scrubber in addition to caustic scrubber to produce air with contaminants in the enabled variety as well as Non dangerous ash mostly not natural salts.
Heater should have adhering to demands:.
Metallic seal framework with ceramic insulation to stay free from cozy radiation and additionally regulate radiant temperature degree.
Advanced gas treatment system to avoid discharge of dangerous gases (massaging system).
Reduced consumption high performance compact computerized burning system.
Low operating as well as maintenance rates.
Fully automatic and also very easy to operate control panel.
Thick refractory concrete lining ranked at 1600 C.
Solid Hearth to make it possible for optimal Fatigue.
Large Leading opening cover for simple loading.
Wide door for ash removal.
Optional Stainless-steel Situation.
Warmth healing choice